ART Masts and Towers

We started building masts and towers in 1973 and have carried well over 4000 installations since then, these have included masts from just about every manufacturer in Australia. This experience lead to the design and manufacture of our own products, which draws upon the extensive installation experience we have gained over the years.

All our products are designed with the practicalities of installation and use as the most important features.

The engineering of our masts and towers adhere to the latest standards (standards which were revised in 2002) utilizing the most up to date design software available. This gives us an edge over most of our competitors who still continue to use old designs that are based on old technology.

These new standards proved quite a challenge when designing our latest product range, as much of what is considered industry standard design parameters just simply do not work when the new standards are applied using current computer modeling.

Safety and quality is an area we continually strive to improve and we hope that you find all ART products to be of the highest standard.

Turnkey solutions

We are able to provide full turn key solutions through a combination of directly manufactured ART products in combination with third party suppliers where such products are required or preferred.

We have the in house skills and required staff to design complete solutions from design to civil works and through to commissioning and hand over.

Our experienced communication techs can also provide coverage mapping and radio system design services

Temporary Communication Site Solutions

ART’s range of temporary and relocatable communication site solutions have been designed and developed to meet all relevant Australian engineering standards and come with fully compliant certification.

Our systems are perfect for temporary use such as mine expansion, military training exercises, sporting events, carnivals or emergency situations.

The units can be custom built to suit individual applications.

For further information please use the contact form at the bottom of this page.

Guyed Lattice Masts (climable/stackable/tilt up)

Generally the most cost effective means of providing a suitable structure, the down side being that they require a larger foot print than a free standing tower.

A unique feature of our lattice mast range is that they can be built as a traditional stackable mast or (depending on the application and antenna load) they can also be built as a tilt up mast, meaning they can be built as one long unit on the ground and then raised up without having to climb or work at heights.

Our masts can also be built from Galvanised steel or from long lasting 316 Stainless Steel

For further information please use the contact   form at the bottom of this page.

Guyed Tubular Masts (climable/stackable/tilt up)

This mast is a climbable tubular guyed mast and can be built the same way as a traditional lattice mast or can be built on the ground and tilted up.

Tilt up masts are traditionally limited to wide open and level land but because our version is also stackable, the same cost efficient mast is no longer limited by the geographical location.

For further information please use the  contact form at the bottom of this page.

Free Standing Towers

This type of tower is typically used where large head loads need to be supported or usable ground area is limited.

For further information please use the contact form at the bottom of this page.

10 – 30m Telescopic Masts

Our patented telescopic lattice masts are now on sale, we will be updating our site with photos and further information soon

For further information please use the contact form at the bottom of this page

Aluminium masts

Great for low height requirements, light loads and point ot point systems.

For further information please use the contact form at the bottom of this page.

Perimeter Fencing

We can provide standard fencing options as listed below or can custom build to suit your requirements.

For further information please use the contact form at the bottom of this page.

Mounting Brackets

We offer a range of standard mounting brackets as listed below or we can custom build to suit your requirements.

For further information please use the contact form at the bottom of this page.

Aviation Lights and Markers

Different locations will have varying requirements for aviation markers. For further information regarding your location, please refer to the CASA website www.casa.gov.au

Below we have listed some commonly used solutions for wind monitoring structures. For further information please use the contact form at the bottom of this page.

Earthing Systems

Earthing requirements vary greatly depending on the particular application ie: an earthing system for a UHF radio system would be significantly different to an earthing system required for a microwave system.

For further information please use the contact form at the bottom of this page.

Fall Arrest Systems

The following fall arrest systems are common examples used in this industry. Alternative systems can be supplied upon request.

For further information please use the contact form at the bottom of this page.

Cabinets and Enclosures

We provide a standard range of cabinets and enclosures, if you cant find what you’re looking for we can custom make to suit your requirements.

For further information please use the  contact form at the bottom of this page.

Signage

ART can supply a range of signage to suit any requirements. If you cant see a sign you require please let us know and we would be happy to have one made.

Quick Enquiry

 

Verification